|
|
 |
 |
At Johnnies Marine we have a
variety of new & used boats to suit your needs and budget.
|
Bundaberg Poly
industries have manufactured Polyethylene products for
over ten years, with products ranging from rainwater
tanks and rural farm equipment to aquaculture ponds
for commercial fish farming.
In 2001 Bundaberg Poly Industries introduced a range
of Polyethylene boats to cater to the Australian
fishing and boating market. These affordable low
maintenance Polycraft boats have quickly established
themselves as a viable alternative to the mainstream
alloy and fibreglass boats already available in the
market place.
|
 |
www.polycraft.com.au |
|
 |
All Polycraft boats are rotationally moulded creating
a one-piece seamless dual skin hull, with no seams and
no weak points. Polyethylene is not susceptible to
electrolysis or osmosis, never needs painting, is easy
to clean, is UV stable, requires little or no
maintenance and has a greater impact resistance than
fibreglass.
|
|
Pictured below
just some of the boats in the Polycraft Range. |
|
 |
 |
Polycraft 455 Centre Console
The Centre Console is a brilliant fishing boat for the keen
angler. It is easy to control, practical and with the
console placed at the most effective location gives maximum
floor space. Also available in 4.1metre. |
Polycraft has
extended its range of value for money boats with the
introduction of the 5.99 Frontier
Cuddy Cabin, which is a progression from the
already popular 5.99 Frontier Centre Console.
The 599 Cuddy is well appointed with deluxe bucket seats,
rear lounge, carpeted floors and a large cabin with two
berths, plenty of headroom and access to the anchor via a
large hatch. It's great for recreational and family boating
with extended pods and boarding rails for easy access for
diving and water sports. |
|
Pictured below
just some of the boats in the Makocraft Range |
|
 |
 |
|
345 Topper
Tracker |
530 Canyon
Runner |
|
Classic Craft |
|
|
Fishing - Exploring - Escaping
or simply fun with the family & friends Classic Craft offers
you the best for a boating lifestyle.
With 2 models to choose from these South Australian boats
represent exceptional value for money.
Our design compared to many 6mtr boats allows for much more
fishing room.
A Classic Craft is more than a boat it is an asset of
superior value. |
 |
| |
|
|
 |
 |
|
 |
|
|
Classic Craft 5000SF - This sensational 5 metre
cubby cab is of totally new design. It incorporates safety,
performance and stability at rest. Ideally suits both family
and the more serious angler You need to experience this boat
to fully appreciate it.
Some of the many features in this cubby cab include ample
head room, large shelves, under-seat storage, large hatch
with step up for easy anchor access, as well as a separate
self-draining anchor well.
The dash layout is extremely practical with plenty of room
for gauges and electronics. On top of the dash is a large
flat recessed area for convenient storage or bracket mounted
electronics.
Rated to carry five adults, the cockpit is spacious and
incorporates a low flat floor for maximum height at the
coamings and built-in coaming grab rail, which makes it one
of the safest 5 metre family boats on the market today.
Fishermen would appreciate the wrap around windscreen, which
provides ample protection whether you're driving the boat
seated or standing. Side storage shelves run the entire
length of the cockpit. Twin bait wells set in the transom
coaming are very handy for the serious angler. Two stainless
steel rod holders come as standard equipment.
The Classic Craft range of boats is built to the highest
standards and represents exceptional value for boats of
their quality. All boats include a 4-year structural
warranty.
|
|
 |
Classic Craft 5500SF - The Classic 5500SF is a
much-awaited addition to the now growing range of Classic
Craft trailer boats. These boats promote a simple fit-out
and uncomplicated lines, while always using quality fittings
throughout.
Modelled on its much proven smaller brother, the 5500SF
maximises on cockpit space, having one of the largest
cockpit areas compared to its rivals. Proving ideal for the
family or the more serious offshore angler.
The Classic Craft 5500SF features full width padded bench
seat at the transom, which can be easily folded away when
fishing, as well as two swivelling bucket seats for driver
and passenger comfort. The two bucket seats can be pedestal
or box mounted for extra storage. There is ample storage to
the sides of the cockpit for rods, fishing tackle, safety
equipment etc. The cuddy features two upholstered bunks with
dry storage underneath as well as a small but handy storage
locker forward of the hatch. The hatch is well proportioned
and offers great access to the anchor for easy setting and
retrieval.
The dash layout offers ample room for electronics option
with room to either flush or bracket mount units. Two
stainless steel grab rails are also fixed to the dash as are
two recessed cup holders.
|
|
